How To Get Power Steering Fluid Out Of Concrete?

How To Get Power Steering Fluid Out Of Concrete?

We’ve all been in that frustrating situation when you’re working on your car, and the fluids spill onto your concrete driveway. Plus, sometimes your car might leak without you even realizing it, which can turn your clean driveway into a messy eyesore.

Nobody wants a stained driveway because it gives your driveway a messy feel and a messy look. Now you are thinking, “How to get power steering fluid out of concrete?

Well, removing power steering fluid stains out of concrete is an easy task if done cautiously. 
In this post, we will give you step-by-step instructions on how to remove power steering fluid stains from your concrete driveway and what you can use for proper cleaning.

You may be interested to read

How Long Do Plasti Dip Rims Last

Can You Add Power Steering Fluid To A Hot Car?

Steps for Removing Power Steering Fluid F out of Concrete

When it comes to removing power steering fluid stains off your concrete, timing is everything. Just like with oil stains, the sooner you address them, the easier they are to remove. However, if your vehicle leaks and you don’t notice it right away, it can leave quite a mess.

So, be prepared for some serious scrubbing if you’re dealing with an older power steering fluid stain. Here are some products and procedures that you will need 

First step: Start by soaking up the fluid

If the stain still has some liquid attached to it, you must first absorb that fluid with some absorbent material. You can Put kitty litter with clay pellets. This helps in absorbing the liquid because clay pellets are super absorbent and can suck up the liquid from the stained area.

Try to soak up as much of the liquid as possible using cat litter. It’s best to leave the cat litter on the spill overnight to absorb the liquid fully. Once you’ve done that, sweep the cat litter into a bag and dispose of it properly.

Second step: To wash, Use detergent or any other product available 

After soaking up the excess fluid with kitty litter, the stains will still be there. To remove the stains from your concrete driveway, you will need to use specific products for different results, such as


This process is an easy one; you just have to pour detergent powder to cover enough space as a stain and add a few drops of water, making it in the form of a paste. Leave that paste overnight, and after that, scrub that place really well with a hard-bristled brush. Now rinse it nicely to remove any detergent left over. By doing so, you are done cleaning the stains.

Trisodium phosphate:

Trisodium phosphate is a pretty strong detergent compared to others. It’s lightly harsh for your skin. So before using this material, you need to protect yourself from any kind of splash. For that reason, you will need to wear protective goggles and gloves. Spread this detergent on the stained area by mixing water in a 1:1 ratio. Let it stay overnight and scrub it off the next day. Now rinse well with water.

Muriatic acid:

Muriatic acid is the strongest when it comes to cleaning stains from the driveway. You will need to wear protective gloves and goggles when handling it. Take one cup of acid and pour it on one gallon of water.

The safest way to use it is by brushing it with a paintbrush, Don’t try to pour it and be gentle when brushing it. After that, you need to neutralize the acid by drizzling it with lime water. After brushing it, let it stay for a few hours and then brush it in a disposable container.

Use WD-40:

It is proven that WD-40 is not just a handy multi-purpose tool to have at home but also a great moisture remover. If you have fluid stains on your driveway, simply apply WD-40 over the entire area and let it sit for at least 30 minutes.

The powerful formula of WD-40 can pull any fluid out, but if necessary, you can scrub the stain with a hard brush and repeat the process until the stain disappears. 

However, be sure to take safety precautions when using WD-40 by wearing protective clothing and keeping small children and pets away from the area.

Commercial Driveway Degreaser: 

If the cleaning process mentioned above fails to remove stains from your concrete driveway. You will need to use a commercial driveway degreaser. 

This process will be easier than other ones because you Just need to follow the instructions mentioned on the product label.

The only drawback of a commercial driveway degreaser is that it won’t be able to clean a really badly contaminated concrete driveway since the degreaser doesn’t have the ability to break down the fluid.

Apply A Paint Thinner

You can use a mixture of paint thinner and sawdust to get power steering fluid out of concrete driveway. Make the sawdust slightly moist by mixing it with the paint thinner. 

Now spread this mixture over the stained area and clean after some time, and sweep. If the stain is still visible, repeat the process and check if the stain is gone.

Can you remove stains using coke?

How to clean power steering fluid off asphalt Driveway

If you have stains of power steering fluid on your asphalt driveway instead of concrete, it’s best not to use any solvent because it can damage the driveway and lighten it.
You can mildly wash it with dish soap and sweep it off, but any other strong detergent or bleach can make the asphalt driveway look worse, so it’s better to avoid strong detergent or bleach.

Can you remove stains using Coke?

It’s an unconventional process to remove stains by using Coke. It’s not like other processes mentioned above, but if you don’t have products that you need to clean power steering fluid stains, you can give it a try.

Simply grab a can or two and pour it over the affected area. Let it sit for a few minutes, then rinse it with water. Ta-da! Your stain should disappear and leave you with a satisfying result.

Final words:

Getting off power steering fluid out of your concrete driveway can be hectic but an easy task if you know how to do it. There are many processes based on materials you will use to clean off power steering fluid out of your concrete driveway.

You can easily clean them by following the steps mentioned above. These methods are widely recognized as effective solutions, whether you’re looking for a commercial product or a DIY remedy, to remove power steering fluid stains from your driveway. 

But before jumping into action, remember cleaning materials are harsh on your skin and your body. To safely execute the process, be sure to use protective wear for safety.

Similar Posts